M350-0367

Software update for Robotic Lawnmowers (ROB S Models only)

cable

Sometimes your ROB S robotic lawnmower needs an update of the software. With this firmware update you will receive all optimizations and new features that make your robotic lawnmower (ROB S600/ S400) even better; free of charge and quickly. 

You only need a computer (PC or Mac), internet access, a  Printer USB cable (USB-A to USB-B; see figure) and a Torx T20. You can find step-by-step instructions below.

How it works:

Step 1:

To perform the update you need a computer with Windows 10 / Mac 10.10 or later. (Other systems are currently not yet supported).

Step 2:

Plug your robotic lawnmower into your computer. To do this you will need a standard USB printer cable (A plug to B plug) and, depending on the model, a Torx 20 screwdriver. The USB connection for the ROB S is in the battery compartment.

Step 3:

Now download the software file, run the program and follow the instructions. A stable internet connection is required for this. Your robotic lawnmower will soon be available again with the latest updates.